What Kind Of Car In The Moonshine Episode Of Mythbusters?

‘Mythbusters’ Camaro That Ran on Moonshine to Be on ‘Sticker Shock’! “Sticker Shock” experts will appraise a very special car this week! Former “Mythbusters'” host Tory Belleci will bring his ’73 Camaro on the show to find out its value. It happens to be the same car used on “Mythbusters” to test a theory about whether cars would run on moonshine! Belleci reveals he purchased the car for $200 when the original show wrapped in 2016 (prior to the reboot).

What episode of Mythbusters is the golf ball car?

MYTHBUSTERS (2003-0) – Golf Ball Car Model Myth: Is a dirty car more fuel efficient than a clean car? Result: Busted! (Concept Plausible) Scene Reference: In Episode “Dirty vs. Clean Car” (2009, E127), the Golf Ball car model was created to model what Adam and Jamie were going to do to a real car; creating dimples on it like a golf ball to test its fuel efficiency.

• Physical Description: Car model is made of plaster.
• Additional Information: Signed by Adam Savage – Signature located on the bottom of the car, top left corner.
• Condition: Due to the nature of the show and the frequent use of the items, all lots will show damage from production including but not limited to broken pieces, damaged surfaces and internal parts, and torn pages.

Please review the full photograph sets to fully understand the condition of the lot. Dimensions: 18″ x 8″ x 6″ (45.7 cm x 20.3 cm x 15.2 cm)

See Item Featured on Tested

: MYTHBUSTERS (2003-0) – Golf Ball Car Model

Can moonshine be used for fuel?

Brow Beat In the new movie Lawless, brothers Jack Bondurant (Shia LaBeouf) and Forrest Bondurant (Tom Hardy) find themselves unexpectedly out of gas on a tense drive out of Franklin County, Va. Luckily, they’re booze-running bootleggers, and after emptying a mason jar of moonshine into the tank, their automobile is back up and running.

1. Can cars really run on moonshine? Only if it’s really strong stuff.
2. To power a car, moonshine—in this case, illicit homemade whiskey—must have an extremely high alcohol content, at minimum 150 proof (or 75 percent alcohol by volume), or 190 proof for best results.
3. During the Prohibition, moonshine could be as weak as 63 proof and as strong as 190 proof,

Alcohol has been used to fuel cars since the dawn of the modern automobile. Henry Ford’s Model T was equipped for running on ethanol as well as gasoline. And in recent years, the federal government has mandated that ethanol make up about 10 percent of most gasoline bought at the pump,

1. Others drive on the more controversial E85, which is 85 percent alcohol.
2. Some penny pinchers have even installed legal “moonshine” stills in their own backyards, to save on gas money.
3. Practically any car could run on high-potency hooch, though the level of performance would vary.
4. The Ford Model A driven in the historical novel Lawless is based on would run pretty smoothly, though it would lose about 30 percent of its horse power.

Most automobiles made prior to 2000 aren’t equipped to handle alcohol long-term, and fueling with ethanol can lead to leaks, rust, and corrosion, However, since alcohol has become a regular additive to gasoline, modern fuel systems have developed a much higher tolerance for the substance.

Is E85 made with alcohol?

E85 is a mixture of ethanol (a/k/a ethyl alcohol) and gasoline. For decades, alcohol has been the fuel of choice in auto racing: Many NHRA dragsters run on pure alcohol.

Is E85 gas or alcohol?

E85 (or flex fuel) is a term that refers to high-level ethanol-gasoline blends containing 51% to 83% ethanol, depending on geography and season (see Fuel Properties and E85 Flex Fuel Specification ). Visit Fueleconomy.gov to learn how to identify a flex-fuel vehicle (FFV) or use the Alternative Fuel and Advanced Vehicle Search to find current FFV models,

Can I convert my car to E85?

Can I convert my car to run on E85? Can I convert my car to run on E85 ethanol? Mitch, Orlando Technically, most any vehicle can be made to run on E85, which is 85 percent alcohol, and 15 percent gasoline. The small percentage of gasoline does two things: it helps the engine start when it’s cold, and it prevents people from drinking the pure alcohol (and no, I’m not making that up).

• E85 can corrode metal parts, damage rubber parts, and confuse your onboard computer, but it is a legitimate replacement for pure gasoline.
• That said, to make the conversion yourself, or have it done independently to federal standards, would cost a fortune.
• The age and type of vehicle would also affect how difficult the job would be.

A few companies make genuine E85 conversion kits, the largest being Chicago-based Flex Fuel U.S. The company sells EPA-certified kits for some Dodge, Chrysler and Ford vehicles, with local installation typically handled by Aamco. Plenty of “kits” are also available that do not have EPA certification – you can find them on eBay ranging in price from $132 to $700, some of them just boxes that plug into your car’s computer.

1. I’d be very careful about converting a gasoline-burning vehicle to run on E85, especially without checking to see if it will void any warranty you may have left.
2. In some states converting to E85 might make financial sense, but with E85 ethanol averaging just 15 percent less in price than gasoline in Florida — and and you can expect to get at least 15 percent lower mileage with E85 than gas — there is no financial reason to spend money to convert to E85, unless you’re intent on making an anti-oil statement.

Sign up for email newsletters : Can I convert my car to run on E85?

What cars can run on ethanol?

Drivetrain: RWD

Vehicle	Fuel Type
Chevrolet Silverado 2WD 2023	Ethanol (E85)
Chevrolet Silverado 4WD 2023	Ethanol (E85)
Ford Explorer AWD FFV 2023	Ethanol (E85)
Ford F150 Pickup 2WD FFV 2023	Ethanol (E85)

Does ethanol in gas hurt engines?

For many homeowners, purchasing fuel for your small engine and outdoor power equipment simply means going to the nearest gas station and filling up with the lowest cost fuel option. Not much thought is given to the ethanol content of the fuel. For longtime boaters and marina managers, however, the dangers of high ethanol content gas are well known, particularly in applications that will be sitting in high heat or humidity for long periods of time.

1. A Mistake That Can Be Costly, In Multiple Ways When fuel contains a high amount of ethanol, the gasoline will begin to decay because of the oxygen in the blend.
2. Since the ethanol is hygroscopic, it absorbs water from the air, causing the fuel blend to separate.
3. Ethanol can be extremely damaging to small engines and high-powered sports equipment, leading to corrosion of the engine and fuel system.

Simply put, what seems like a relatively innocuous purchase of an ethanol containing fuel can ruin your engine. Making matters worse, using a high-ethanol fuel may violate a boat or power equipment owner’s warranty. New Rules Require Increased Awareness at the Pump From ever-changing government mandates to improper labeling at gas stations, consumers must remain alert when purchasing fuel, particularly boaters.

• Recently, the federal government moved to allow sales of E15 gasoline (containing 15% ethanol) year-round.
• Burning significantly hotter than other fuel options, E15 can result in an engine overheating.
• Experts unanimously warn boaters about the possibility of confusion and the risk of accidentally filling their boat’s gas tank with improper fuel.

According to Mercury Marine : “Fuel containing higher proportions of ethanol is not compatible with many fuel system and engine components and, if mistakenly used, will cause irreversible damage to these components that will lead to engine failure and potential safety risks.” With 142 million boaters fueling up their vessels, the introduction of E15 fuel at the pump could be devastating.

To raise awareness, the National Marine Manufacturers Association (NMMA) recently created a website called Protecting Boaters at the Gas Pump. They post pictures of the various ways E15 gas is poorly labeled and remind boaters of the dangers associated with filling anything other than late-model automobiles with E15 fuel.

With 63% of boaters assuming any fuel at the pump is safe to use, it’s more important than ever to make people aware of the danger high-ethanol fuel poses. Treating Your Fuel Even if you don’t use E15 fuel in your boat, proper fuel treatment is still vital.

• As such, beginning in February 2019, Walbro is launching a 12oz.
• Evergreen-scented fuel treatment.
• Not only does this innovative treatment clean and stabilize the fuel you use for your outdoor equipment, but the evergreen scent lets users know it’s working.
• The additive not only fights against the phase separation and corrosion that comes from ethanol-based fuel blends, but it also clears carbon deposits from the combustion chamber to keep your engine running as efficiently as possible.

To learn more about how Walbro can help protect your boat’s engine, or to see their Complete Fuel System Kit, visit https://shop.walbro.com/collections/products/products/power-equipment-complete-fuel-system-kit today! https://spark.adobe.com/page/dYPx7SjouAr2k/ https://spark.adobe.com/page/dYPx7SjouAr2k/

Why was MythBusters cast fired?

Why did the popular trio of Grant, Kari, and Tory leave ‘Mythbusters’? – The program’s executive producer, Dan Tapster, explained to Entertainment Weekly that contract negotiations were the biggest factor in Grant, Kari, and Tory’s exit from the show. Source: The Discovery Channel Article continues below advertisement Dan explained the circumstances: “We were very keen for to be a part of the show, we are massive fans of theirs, and what they did over 10 years was phenomenal. There were negotiations, and based on those negotiations, they opted out. Source: Discovery Channel Article continues below advertisement Dan ultimately said that the “shake-up” was good for the series and allowed the production crew to take the program in a different direction. Still, fans felt slighted over losing the trio of supporting characters they had come to love over the years.

Did MythBusters do speed bus jump?

A bus could NOT do the jump in Speed – Based on the team’s tests, the vehicle could not have successful completed the jump over the 50-foot gap in the road.

Do dimples on cars increase fuel economy?

On a recent episode of the TV show MythBusters, special effects experts Adam Savage and Jamie Hyneman ran tests to see if a dirty car is more fuel efficient than a clean one, It turned out that dirt doesn’t make a difference to the mileage (in fact it reduced mileage by ~1.5 mpg).

• But the intrepid experimenters didn’t stop there.
• They went a step further to test if covering a car in actual golf ball-like dimples would improve its fuel efficiency? As seen in the video below, dimpled golf balls could fly almost twice as far as smooth balls, since they disrupt the air around them, which creates a smaller wake and reduces drag.

So could the same principle could really be applied to race cars? To answer the question, the Mythbusters team went about adding 1,082 dimples to a Ford Taurus’s exterior. To keep the experiment consistent, all 1,082 dimples removed from the clay exterior were put in a box and then set in the back seat so that the car would weigh exactly the same as before dimpling. Smooth Vs Dimples At constant 65 mph speed, the cleaner car gave 26 MPG and the dimpled one gave an amazing 29 MPG, The theory or the improvement is that, like a golf ball, the dimples would reduce the car’s drag through the air, thus allowing it to travel the same distance at the same speed using less fuel. The Mythbusters crew experimented with dimples on this Ford Taurus So, in a difficult economy with high fuel prices, a dimpled car design can very well save you some cash. In fact, an improvement of 3 MPG translates into ~$400-600 per year of savings for the average person who drives 15,000 miles. If you have the interest to find out more, you can view the full video of MythBusters Mileage Test.

Is alcohol fuel safe?

Using alcohol as a fuel source Pure forms of alcohol, such as denatured alcohol, may be used indoors with adequate ventilation. However, some forms may be toxic and need more ventilation due to toxins produced from combustion. The following forms of alcohol are good candidates for use as a fuel source.

Isopropyl alcohol (rubbing alcohol) is an acceptable cooking fuel. It may be purchased in 70 percent, 91 percent. The higher the percentage of alcohol, the better the alcohol will burn. Isopropyl alcohol produces a yellow flame and does not burn as cleanly denatured alcohol or ethanol. Denatured alcohol is often recommended by manufacturers of alcohol stoves.

It can be purchased online or in hardware stores in the paint section. Ethanol or ethyl is about 95 percent alcohol and is a fantastic fuel for burning indoors. It burns so cleanly that the flame is blue or nearly invisible. Remember that any flame can produce carbon monoxide.

Although alcohol is one of the safest fuels to burn indoors, proper ventilation is required to ensure adequate oxygen is available for complete combustion to prevent carbon monoxide from building up. Be sure to keep a working carbon monoxide detector with a digital readout nearby when burning anything! Alcohol is a great storage fuel and has an indefinite shelf life if stored in a tightly sealed container.

Alcohol will evaporate quickly if left open and lose potency. Alcohol has a low flash point, which means that it catches on fire very quickly. Alcohol burns about half as hot as some other fuels but is a great choice for cooking indoors. It is extremely flammable, but not explosive.

Can I make my own gasoline?

Download Article Download Article Increasing prices, concerns over supplies and suppliers, and environmental worries make the notion of creating your own synthetic gasoline very appealing. It is scientifically possible to create fuel for gasoline powered engines out of materials like wood pellets or organic trash, but the costs, explosive dangers, and specialty equipment and skills needed put such methods beyond the abilities of most people.

• FEMA has a guide to building your own biomass gasifier, which converts wood chips into synthetic gasoline.
• There’s also the Fischer-Tropsch process, which converts biomass into liquid fuel.
• Ethanol works as synthetic gasoline. You can make your own ethanol through DIY distillation or using a commercial ethanol maker.

1. 1 Search online for “fema gasifier” to find an essential guide. In 1989, the U.S. Federal Emergency Management Agency (FEMA) published a guide called “Construction of a Simplified Gas Generator for Fueling Internal Combustion Engines in an Emergency.” This document has become the go-to guide for skilled DIYers who want to try their hand at creating synthetic gasoline out of wood pellets or chips.
   • http://www.driveonwood.com/static/media/uploads/pdf/fema_plans.pdf
   • Also download the “Handbook of Biomass Downdraft Gasifier Engine Systems” at https://www.nrel.gov/docs/legosti/old/3022.pdf
2. 2 Get a handle on how gasification works. Section I of the FEMA guide provides a wealth of background information on the history and science behind the process known as gasification. It points out, for example, that all combustion (including in internal combustion engines) involves vapor, and that it is therefore possible to filter and isolate combustible vapor from burning biomass such as wood pellets.
   • Biomass gasifiers don’t create liquid fuel, only combustible vapors. However, it’s important to remember that internal combustion engines vaporize liquid fuel anyway.
   • Section I also presents an interesting historical account of the process, including how widespread the use of biomass gasification was in Europe during World War II.

   Advertisement

3. 3 Follow the step-by-step instructions if you want to try building a system. FEMA created this guide for use by Americans during crises in which gasoline supplies might be cut off. So, the biomass gasifier it describes uses widely available parts such as a metal trash can and sections of piping. However, that doesn’t mean building the gasifier is an easy job that everyone can handle.
   • In basic terms, the wood pellets or shavings are burned in one chamber of the gasifier, the smoke is filtered through more wood pellets/shavings in a second chamber, and the filtered vapor is mixed with air as it enters the intake valve of the internal combustion engine.
   • You’re using fire to create combustible vapors, so it’s essential that you follow the directions very closely and take every recommended safety precaution.
   • You may also benefit by watching online videos that show DIYers building gasifiers based on the FEMA plan, such as https://youtu.be/a6e3CprVTi8?t=220,
4. 4 Power motor vehicles or a generator with a completed gasifier system. The FEMA guide shows you how to attach the gasifier to a standard farm tractor and use it to power its engine with wood shavings. In theory, you could use the same principles to power a typical automobile in an emergency situation—this wouldn’t be “street legal” under normal circumstances, though!
   • In reality, this type of gasifier is probably more useful as a way to power a gas-fueled generator, which in turn can generate electricity for your home. This way, you can keep the lights on in your home with little more than some scrap wood.

Advertisement

1. 1 Learn how Fischer-Tropsch creates liquid fuel out of biomass. In very basic terms, the Fischer-Tropsch process adds high temperature, high pressure, and a heavy metal catalyst (like iron or cobalt) to the typical biomass gasification process. As a result, it can be used to create liquid synthetic gasoline out of biomass like wood pellets or organic trash.
   • The high heat and pressure convert the biomass into a mix of carbon dioxide and hydrogen, at which point impurities can be filtered out. Then, the introduction of a heavy metal catalyst turns the carbon dioxide and hydrogen into long-chain hydrocarbons that are cooled and condensed into a liquid.
2. 2 Accept Fischer-Tropsch’s limitations as a DIY project. Fischer-Tropsch has great DIY appeal because, unlike biomass gasification that produces a combustible vapor for immediate use, it produces liquid fuel that can be stored and used as needed. However, while it’s theoretically possible to replicate using widely-available materials, creating a Fischer-Tropsch converter is likely beyond the capabilities of most people.
   • It relies on temperatures of at least 300 °C (572 °F) and preferably 1,000 °C (1,830 °F), and pressures of up to tens of atmospheres. This makes it extremely challenging-and dangerous, due to the risk of an explosion-if you don’t have advanced mechanical and scientific knowledge.
3. 3 Get detailed plans and expert assistance if you wish to proceed. If you’re eager to try building a Fischer-Tropsch converter, research it thoroughly and study several conceptual designs. If you’re not a mechanical engineer, you’ll almost certainly need to find one to help you construct the converter.
   • While the basic building materials are widely accessible—things like steel piping, pressure gauges, etc.—you need expert precision and knowledge to build a Fischer-Tropsch converter effectively and safely.
   • Putting combustible materials under high pressure creates a major risk for explosions if the converter isn’t built and maintained properly.
4. 4 Don’t expect to save money on fuel this way. A Fischer-Tropsch converter lets you create liquid synthetic gasoline out of widely available materials like wood chips, so it is potentially valuable in an emergency situation. However, for general use, it is far more expensive to create fuel this way than to purchase typical gasoline.
   • So, unfortunately, this isn’t a “magic bullet” replacement for gasoline derived from crude oil.
   • Fischer-Tropsch fuels, however, do burn cleaner and create less environmental pollution than standard gasoline.

Advertisement

1. 1 Research the process of distilling ethanol at home. Ethanol fuel is nothing more than distilled alcohol. So, essentially, if you can learn to make moonshine, you can learn to make a gasoline alternative. With some good plans and a bit of DIY know-how, you can build a simple still out of items like an old hot water tank and some conduit piping and produce ethanol yourself.
   • Home production of ethanol on a small scale (under roughly 5,000 US gal (19,000 L)) is legal in the U.S., but check with your local authorities for any restrictions where you live.
   • Take the time to find good plans for building a still, and consider working with someone experienced with the process. Heat and pressure are utilized to create ethanol, and these can be dangerous with improperly-constructed equipment.
2. 2 Look into buying an all-in-one home ethanol maker. If building a still and making your own ethanol “moonshine style” isn’t your thing, you may have other options. Search online for companies that produce and sell ethanol fuel makers. With one of these machines, all you really need to do is add sugar, yeast, and water, push a button, and wait for it to produce ethanol for you.
   • These machines can be the size of a stacked washer and dryer and may include a pump for direct fueling into cars, etc.
   • However, expect to pay around $10,000 USD for one of these machines. Also, depending on the cost of the raw materials (namely sugar), producing ethanol this way may cost more than filling up your car with traditional gasoline.
3. 3 Don’t add straight ethanol to a standard internal combustion engine. If you want to power your car, lawnmower, etc. on ethanol, you need to blend it with at least 15% gasoline first. Otherwise, you risk damaging your engine. However, if you have a modern flex-fuel vehicle, you can fill it up with straight ethanol.
   • It’s also possible to convert a standard engine so it can run on straight ethanol. For a car engine, this involves things like resetting the ignition timing and rejetting the carburetor. Unless you’re knowledgeable in auto repair, you’ll need a mechanic to make these changes.

Advertisement

Add New Question

• Question How can I make my own gasoline? Corn or ethanol or mineral spirits? You just need a triple distiller, or an engine that doesn’t mind some gunk build up. You need to be careful, but it can be done. You need the initial vat to be stainless material, like an iron/manganese blend.
• Question How long from start to finish, and where do I find these tools? It takes about two days to get your first liter. By the time you’re finish building this, you will be hooked. You will want to build one for your neighbor. Find the tools in your work shed, a friend’s garage, or Home Depot. Get vice grips, too.
• Question Does it cause pollution? Stephan Brun Community Answer It produces synthetic petrol and oil from non-fossil sources. As such, it carries the normal problems of CO₂ production when burnt, among other things. It does mean you can run petrol-based engines off-the-grid, without access to petrol stations, and that can be excellent in an emergency, but if you’re doing this for the environment and are not collecting the exhaust, this won’t serve you.

Ask a Question 200 characters left Include your email address to get a message when this question is answered. Submit Advertisement

The help of a certified engineer or mechanic would be useful before attempting to make any type of synthetic gasoline.

Thanks for submitting a tip for review! Advertisement

• Do not smoke or have any source sparks or flames around when making or handling gasoline.
• Ensure that everything is fitted together properly so no explosive liquids can leak out.
• Touch a metal object before you handle gasoline. Static electricity can cause explosions and fires.

Advertisement Thanks to all authors for creating a page that has been read 292,149 times.

Is E85 illegal?

Flex fuel conversion kits – A flex fuel conversion kit is a kit that allows a conventional equipment manufactured vehicle to be altered to run on either petrol, E85 or any combination thereof. They are legal in every state except California, due to that state having its own clean air standards.

Does E85 add horsepower?

4. Faster Burning – E85 fuel has a faster ignition time and flame propagation when compared to gasoline. This leads to higher cylinder pressure, as well as increased engine torque and power, gaining up to 20%. The increased exhaust gas flow allows turbos to spool quicker.

Does E85 burn faster?

How Flex Fuel Can Lower Your MPG – Fuel economy is hard to predict. Most people see a decrease in fuel economy when running their vehicle on flex fuel. The decrease may be only a few percentage points, or it may be as much as 25%. Most people report a reduction in fuel economy of 15 to 25% when running on flex fuel.

• The loss in MPG is dependent on the actual ethanol content of the fuel that you’re running.
• The drop in fuel economy is because ethanol has lower energy content per gallon than gasoline.
• E85 also burns faster than regular gasoline because it vaporizes faster.
• So your engine may eat through E85 faster than regular gasoline.

That’s not always true, though.

Is E85 a diesel or petrol?

E85 is an unleaded petrol that’s a blend of 15% regular unleaded and up to 85% ethanol.

Is ethanol basically moonshine?

What’s the Difference Between Everclear and Moonshine? – Both Everclear and Moonshine are unaged spirits; however, Everclear is made from grain and Moonshine from corn. Everclear is a brand name of a neutral-tasting, very potent grain alcohol. Moonshine is a general term used to describe illegally produced corn whiskey.

What is considered moonshine?

Moonshine: From Woods To Whiskey Throughout its storied past, moonshine has been called many things: shine, white lightning, hooch, fire water, white dog, or bathtub gin. Without regulation, there was no standardization to the methods or monikers of “moonshine”.

• Currently, to be called “moonshine”, there are some loose qualifications the spirit must meet.
• Ultimately, moonshine is grain alcohol at its purest form.
• Moonshine was originally made in secret during the prohibition era and, to contemporary purists, it’s not considered “moonshine” unless it’s clandestine.

However, most distilleries now legally produce moonshine, regardless of whether they bottle and sell a product labeled as “moonshine.” Whiskey, prior to aging, is moonshine! So, What is Moonshine? Moonshine is defined as a homemade, un-aged whiskey, marked by its clear color, corn base, and high alcohol content (sometimes peaking as high as 190 proof).

• Traditionally, it was produced in a homemade still and bottled in a mason jar.
• For most of its history, moonshine was distilled in secret to avoid taxes and alcohol bans (specifically during the Prohibition Era).
• The term “moonshiner” was popularized in the 18 th century, where individuals deep in the woods of the Appalachia attempting to avoid being caught by police distilled under the light of the moon.

How it’s Made Moonshine consists of:

Corn Barley Wheat or Rye (optional) Yeast Water

While distillate or moonshine can be made from pretty much any type of grain, it originally was made from barley or rye. Moonshine at its purest form, is whiskey, or bourbon distillate. It is un-aged, high in proof, and clear in color. During the Prohibition Era, if grains were unavailable or too expensive, moonshiners would use white sugar which still gave them that alcohol “kick” they were looking for, but with a sweeter taste to it.

Making moonshine has two main steps: fermentation and distillation. Fermentation is the process of yeast breaking down the sugars in the grains to produce alcohol. Once the fermentation process is complete, the “moonshine mash” (fermented grains and yeast) is sent to the still. As the temperature rises in the still, the steam is forced through the top of the still into the worm box.

The worm box is typically a barrel with cold water flowing through it and a metal coil pipe down the center. Alcohol vapors flow through the coil pipe where they cool and condense back into a liquid. The last part of distillation is the spout or valve that leads from the worm box to a bucket or steel drum.

Typically this would be sent through at least one filter, but potentially more. The “XXX” label, that has been popularized in moonshine imagery, was originally an indication of quality; each “X” represented a time that it had been distilled. Moonshine Today Moonshine has changed quite a bit since the backyard bottlers of Prohibition.

In 1933, U.S. alcohol production became legal, as long as you paid the appropriate taxes and had the correct permits. While this makes moonshine legal, you are still prohibited from distilling some at home. Why is this? Mainly for safety reasons. Distilling is a very precise chemical process that, when done incorrectly, can create a dangerous environment or produce a toxic libation.

Governmental regulations are not just for tax purposes, but to protect the consumer from drinking something that could cause serious health issues. “Unlike other spirits, legally produced moonshine can be made with any source material, at any proof, can have coloring and flavoring added – the works. There are no rules for its classification,” said Colin Blake, director of spirits education,

With such a loose classification of this grain alcohol, many different flavored products can still be considered moonshine! At Jeptha Creed, we offer a high-proof original moonshine highlighting the traditional flavor profile, but made with modern distillation processes.

1. All of our moonshines start with the same four grains as our flagship bourbon, featuring our heirloom Bloody Butcher Corn.
2. If you’re less interested in this pure un-aged whiskey flavor, we have expanded into the modern spectrum of moonshine with a naturally-flavored lineup.
3. Delicious moonshine flavors like apple pie, blackberry, cinnamon, and lemonade represent our ode to the history with a focus on the future.

Our moonshine is even sold in mason jars as a “hats off” to the non-regulated history it came from. Our line of moonshines are a far cry from the potentially deadly spirits that used to flow from homemade stills. Representing its full integration into the contemporary alcohol industry, moonshine now even has its own holiday! National Moonshine Day is on the first Thursday in June (June 2 nd of 2022).