How Many Beers In a Half Keg? There are 124 16-ounce pints or 165 12-ounce cans or bottles in a full half keg, also called a half barrel keg. If you run out of beer in your half keg, it might be time to practice your upsell.
Contents
How many beers are in a 1 2 keg?
Keg Sizing Information 1/2 barrel = 15.5 gallons = 124 pints = 165 12oz bottles – (Full Size Keg) 1/4 barrel = 7.75 gallons = 62 pints = 83 12oz bottles (Pony Keg)
How many beers are in a,5 keg?
How Many Beers In A Keg?
Cornelius Keg | Half Barrel Keg | |
---|---|---|
Capacity (gal / oz / L) | 5.0 gal 640 oz 18.93L | 15.5 gal 1,984 oz 58.67L |
Pints (16 oz) | 40 | 124 |
Bottles / Cans (12oz) | 53 | 165 |
Growlers (64 oz) | 10 | 31 |
How many liters is a 1 2 keg?
Commercial Keg Sizes
Keg Size | Gallons / Ounces | Liters |
---|---|---|
Half Barrel Keg (1/2 BBL) | 15.5 gal / 1,984 oz | 58 liters |
Quarter Barrel Keg (1/4 BBL) | 7.75 gal / 992 oz | 29.3 liters |
Sixth Barrel Keg (1/6 BBL) | 5.16 gal / 672 oz | 19.8 liters |
How many glasses are in a 1 2 keg?
Half Barrel (1/2 bbl) – The name is a bit misleading, as it is considered to be a full size keg today. I assume no one could pick up a full barrel back in the day (the 1980s), and henceforth, the half barrel keg became defacto. However, the guy from Game of Thrones just deadlifted 1,100 pounds, so anything is possible these days.
- Let’s see the Mountain do a keg toss with a full barrel of beer! The Half Barrel is a 15.5 gallon keg.
- In case you’re wondering how many cups are in 15.5 gallons, the answer is 248.
- The 1/2 bbl is the standard size full keg that college parties are built on.
- Accounting for spillage and tap mishandling, the 1/2 bbl will fill up over 160+ red solo cups with 12oz beers from its tap before it kicks.
What is amazing to us is that craft beer breweries even offer half barrels, like Hobbs Tavern Brewing in West Ossipee, New Hampshire,
Why is it called a 1 2 barrel keg?
U.S. keg sizes – Most U.S. brewers sell beer in 1 ⁄ 2 barrels of 15.5 gallons, 1 ⁄ 4 barrels of 7.75 gallons, and 1 ⁄ 6 barrels of 5.17 gallons. Since keg sizes are not standardized, the keg cannot be used as a standard unit of measure for liquid volumes, A typical keg (half-barrel) with a single opening in the center of the top end A keg, or half-barrel is a 15.5 U.S. gallon vessel. A quarter-barrel has a volume of 7.75 U.S. gallons. Generally a keg is a vessel smaller than a barrel; thus, it is 30 gallons or smaller.
- 12.7 Imperial gallons
- 58.67 liters
- 103.25 Imperial pints
- 124 U.S. pints
- 496 U.S. gills
- 165 twelve fluid ounce (U.S. measure) drinks
- About 90 bombers (22 fl oz bottles)
- About 6.88 24-unit cases of 12 fl oz cans
- About 5.5 30-racks of 12 fl oz cans
- 1,984 fluid ounces (U.S.)
However, beer kegs can come in many sizes:
Size ( US gal ) | Size ( liters ) | No. of 12 fl oz drinks | No. of 16 fl oz drinks | No. of 20 fl oz drinks | Weight of full keg (lb) | Also known as |
---|---|---|---|---|---|---|
1.32 | 5 | 14 | 10.6 | 8.5 | — | Mini Keg / Bubba (single-use/recyclable) |
3.875 | 14.67 | 41.3 | 31 | 24.8 | — | Eighth Barrel |
5 | 18.9 | 53 | 40 | 32 | 55–60 | Soda syrup / Corny Keg / Home Brew |
5.16 | 19.8 | 56 | 42 | 33 | 58–60 | Sixth Barrel / Torpedo Keg / Sixtel / Log |
6.6 | 25 | 70 | 50.25 | 42 | — | “Half Barrel” (Europe) |
7.75 | 29.3 | 82 | 62 | 49 | 90 | Quarter Barrel / Pony Keg |
13.2 | 50 | 140 | 105 | 84 | — | Import Keg (standard European “Barrel”) |
15.5 | 58.66 | 165.3 | 124 | 99.2 | 140–170 | Half Barrel / Full Keg |
What size is a 1 2 keg?
Half Barrel Kegs (1/2 BBL Kegs) – Half barrel kegs are the most common type of keg and probably what you think of when you hear the word “keg”. A half-barrel keg is generally considered to be the standard keg. They are the main keg size used for distribution to bars, taprooms, and restaurants.
- Half barrel kegs are also often used for home bars (standard kegerators are usually made to work specifically with half barrel kegs), large events, business functions, large parties, and, of course, frat parties.
- Half barrel kegs are the largest standard keg size.
- A full half keg stands 23⅜” tall and has a diameter of 16⅛”.
They hold 15.5 gallons (1984 oz), which translates to 124 16-oz pints or about 165⅓ 12-oz bottles or cans. Empty, a half barrel keg weighs about 30 lbs. A full half barrel keg weighs about 160lbs, making them a challenge to carry. Purchasing a new half barrel keg will set you back about $180.
How much is a half keg?
Half barrel keg – In addition to the above-mentioned full-size keg, you can also buy a half barrel or quarter barrel kegs. A half barrel (15.5 US gallons) is often used for larger events and typically costs around $160-200, while a quarter barrel (7.75 US gallons) is great for smaller gatherings and typically costs around $100-150.
How long does a 1 2 barrel keg last?
How Long Does a Keg Stay Fresh? – For most beers on tap, dispensed with CO2, the rule of thumb is that non-pasteurized beer will retain its freshness for 45-60 days, if proper pressure and temperature are maintained. If you are serving up pasteurized draft beer, the shelf life is around 90-120 days.
- If you have just gotten an air pumped party keg, you should consume the beer within 8-12 hours if you want to enjoy it at peak freshness.
- You will find that most breweries now print a freshness date on the keg for your convenience.
- Be sure to read the labeling carefully, as some breweries print this as an expiration date, while others opt for a “born on” date.
These dates have the days it is in inventory at the brewery figured into the equation and generally print the date on the side of the keg or on the cap.
How much does 1 keg feed?
Here’s How Many People You’ll Need To Make a Keg of Beer Worth It shutterstock.com shutterstock.com As you may know, the key to throwing a great party – or any sizable get-together involving thirsty people, for that matter – is to have plenty of beer. While getting seems like a smart and economical way of maintaining an uninterrupted supply of the sudsy stuff, it turns out there’s a good chance you might end up with – get this – too much beer.
Really. Hauling a whole keg into your place should depend on how many people you’re having over and how much you think they’ll end up drinking before you kick ’em to curb for the night. Thankfully, the folks over at have come up with a helpful way of breaking it down by the numbers – you know, in case you’re better at drinking beer than you are at basic math.
At 15.5 gallons of beer, a keg translates to roughly 165 12oz (the amount in a can) servings of beer. That means you can have 40 people over and everyone will get at least four beers, or eight beers each if you have 20 people over. Of course, the math doesn’t factor in the friend or two who will hit up the keg way more than four times throughout the night, but either way, you’ll have a lot of beer on your hands.
However, getting a keg makes much more sense if you’re having people over for several hours, according to the The Kitchn. Not having to deal with everyone’s own six-packs and the resulting mountain of empty cans and bottles is a plus, too. In the event that you do decide to buy a keg, just don’t attempt to tap it like,
Also, we’re coming over. h/t for our daily Thrillist email, and get your fix of the best in food/drink/fun. is Cities News Editor at Thrillist and plans to hit up the office keg later today. Send news tips to [email protected] and follow him on Twitter,
What is a small keg called?
Quarter Barrel Keg: – If height is an issue, the Quarter barrel keg is the solution. It has the same width (16⅛”) as a full barrel, but it is 10″ shorter in height. Individuals call it “Pony Keg” or a “Stubby Keg,” a very popular keg size because it will hold the equivalent of sixty-two pints or eighty-two bottles off beer.
Common names: Pony Keg, Stubby Quarter Common Uses: Small Parties
How do you measure beer in a keg?
“Tenthing” – The most common beer keg inventory method used by bars is called “tenthing.” This is also the most rudimentary approach. Tenthing involves lifting up the keg and estimating how much beer you think is left to the nearest tenth. For example, if it feels like the keg is approximately 70% full, you’d label it as,7. There are two main problems with using the tenthing method: • It is extremely subjective, and it’s very likely that if two different people performed inventory on the same keg, you would receive two different measurements. • It is very inaccurate and fails to provide you with the detailed information necessary to properly evaluate the performance of your draft beer products,
- If you are only trying to calculate liquor cost, then this isn’t a terrible method for taking inventory of your draft beer.
- But if you’re looking to gather the detailed data necessary to run your bar more efficiently, you need to have a more accurate way to measure the inventory of your beer kegs.
- In addition, you will want to use a sophisticated liquor inventory system so that you’re not just lumping all of your beer cost together into one figure.
A sophisticated liquor inventory system will allow you to evaluate the performance of each beer you sell individually, providing you with the actionable information necessary to more effectively run your bar. On Bar-i’s reports, we provide liquor cost for each product individually, allowing you to see how each product performs compared to other products on your line.
How many standard drinks in a keg?
How many beers do I get out of a keg? – Heaps! A 50 litre keg gives you about 175 pots or 118 schooners (175 x 285ml or 118 x 425ml glasses).
Does keg beer have more alcohol?
In this article, we’ll discuss and answer the question, is draft beer stronger than bottled beer. If you’re anything like us, you have a few beers that are your favorites, and your fridge is rarely without them. And, if you have the opportunity to drink your favorites on draft, you probably jump at the chance.
Have you ever noticed that when you drink your favorite beer, on draft instead of from the bottle or can that it seems to be stronger? This is something that we have noticed from time to time, and it often leads us to wonder if the beer we’re drinking on draft has a higher alcohol content than the same beer in a bottle or can.
Now, if you’ve had the same thought, you’re probably relieved to know that there are other people out there that have had the same experience. Draft beer is not stronger than a bottle, even though it may seem otherwise. They may sometimes seem stronger or have a more rapid effect on your body than canned or bottled beer, but there is no difference in alcohol content between a beer in the bottle and the same beer on draft.
How many Guinness in a keg?
How many beers are in a keg? – The number of beers in your keg depends on the size that you order. A keg can hold anywhere from 14 to 165 12-ounce beers. Here’s a quick rundown to help you figure out which size keg to order:
Half barrel (a.k.a. full-size keg) holds 15.5 gallons or 165 12-ounce beers One-quarter barrel (a.k.a. pony keg, stubby or slim quarter) holds 7.75 gallons or 83 12-ounce beers One-sixth barrel (a.k.a. sixteen) holds 5.2 gallons or 55 12-ounce beers Cornelius keg (a.k.a. corny keg) holds 5 gallons or 53 12-ounce beers Mini-keg (a.k.a. bubba keg) holds 1.32 gallons or 14 12-ounce beers
What is the difference between keg and barrel beer?
The difference between cask and keg – So now you know exactly what cask and keg means, let’s highlight some of the biggest differences between the two:
Cask Beer | Keg Beer | |
Material | While we are seeing more metal casks, traditionally they’re made from wood. | Kegs tend to be crafted from stainless steel. |
Carbonation | Cask beers don’t have added gas, instead the carbonation is a natural reaction from the fermentation process. | Keg beer is served with the addition of gas – such as carbon dioxide and sometimes nitrogen. |
Temperature | Cask beers are usually served at cellar temperature (11-13 degrees). | Keg beers are served at a much colder temperature – usually around 3-8 degrees. |
Design | Casks are rounded in shape to allow for sentiment to settle. | Kegs are straighter in design and have a single opening. |
Shelf life | As a ‘fresh’ product, ales from casks need to be used up within three days. | Keg beers last for much longer as little oxygen comes into contact with the liquid. |
Preparation | Cask ales require stillaging, tapping and venting before serving, which can take up to 48 hours. | Keg ales are ready to drink. |
Taste | The flavour of cask ales is described as being deep and rich. | Keg beers, however, are light and refreshing. |
What is a 1 4 keg called?
Quarter Barrel Keg: – Short and stubby in size, the Quarter barrel keg is the same width (16⅛”) as a full barrel, yet approximately 10″ shorter in terms of height. Commonly called a “Pony Keg” or a “Stubby Keg,” this popular keg size will hold the equivalent of sixty-two pints or eighty-two bottles off beer.
Nicknames: Pony Keg, Stubby Quarter Common Uses: Small Parties Dimensions: 16⅛” x 13⅞” Capacity: 7.75 gallons / 992 ounces
How long does a 1 2 keg of beer last?
How long does draft beer remain fresh? – There is no one hard and fast rule for how long a keg of draft beer will stay fresh. This is especially true for craft beers because different styles of beer last longer than others. A good rule of thumb is that the shelf life for a keg of pasteurized beer is about 90-120 days (or 3-4 months), and unpasteurized draft beer will last about 45-60 days (or 6-8 weeks) when stored at the proper temperature.
Many imported and domestic beers are pasteurized. If you’re unsure whether or not your beer has been pasteurized, treat it like it is unpasteurized. An important thing to remember is that countdown starts the day your keg is filled at the brewery, not when you tap it or buy it. One of the first things you should do when you pick up a keg is to check the label to see if it has a “born on” date or expiration date.
If the beer in your keg is passed its expiration date, then we wouldn’t recommend drinking it.
How big is a 1 2 barrel beer keg?
Half Barrel Kegs (1/2 BBL Kegs) – Half barrel kegs are the most common type of keg and probably what you think of when you hear the word “keg”. A half-barrel keg is generally considered to be the standard keg. They are the main keg size used for distribution to bars, taprooms, and restaurants.
Half barrel kegs are also often used for home bars (standard kegerators are usually made to work specifically with half barrel kegs), large events, business functions, large parties, and, of course, frat parties. Half barrel kegs are the largest standard keg size. A full half keg stands 23⅜” tall and has a diameter of 16⅛”.
They hold 15.5 gallons (1984 oz), which translates to 124 16-oz pints or about 165⅓ 12-oz bottles or cans. Empty, a half barrel keg weighs about 30 lbs. A full half barrel keg weighs about 160lbs, making them a challenge to carry. Purchasing a new half barrel keg will set you back about $180.
What size is a 1 2 keg?
Comparing Keg Sizes & Types:
Capacity (gal / oz) | Height / Weight | |
---|---|---|
Sixth Barrel | 5.16 / 661 | 23⅜’ / 58lbs. |
Quarter Barrel | 7.75 / 992 | 13⅞’ / 87lbs. |
Slim Quarter | 7.75 / 992 | 23⅜’ / 87lbs. |
Half Barrel | 15.5 / 1984 | 23⅜’ / 161lbs. |
How much is 1 2 keg of Bud Light?
What does a keg of Bud Light cost? – A half-barrel keg of Bud Light can cost anywhere from $79 to $139, depending on the market (plus deposit). The reason for the range in price is that distributors, who sell the kegs to retailers like Total Wine & More, vary by state and market.